Thursday, December 3, 2015

SP Flash Tool Errors



                                                                SP Flash Tool Error


SP Flash Tool Errors pdf Download>>>ERRORS PDF
 Error 5054 Message:  BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to
Solution:
* Ensure you're using the correct files. If you're sure they are, then try formatting before flashing again

Initialize scatter failed Message: Error: Initialize scatter file failed. Please check the scatter file name you load is legal
Meaning: SP Flash tool doesn't accept the name format of your scatter file
Solution:
* Ensure the scatter file wasn't renamed. If you're certain it wasn't, try a higher version of SP Flash tool

Error 8038 Message: Error 8038! Android download  pmt is ready and layout has been changed
Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility
Solution:
* Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download
* If Download doesnt work then do a firmware upgrade
* If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
* If that isn't feasible, try formatting first or use firmware upgrade
* If that doesn't work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" . 


Error 4032 Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
Meaning: SP Flash tool is unable to enable DRAM / communicate effectively with the device
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Ensure you tick the boxes for only the files present in the ROM you're about to flash
* Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using
* Delete the sp flash tool folder then re-extract
* Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
* If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
* Consider using the latest version of Sp Flash tool
* Format the phone before trying to flash the file(s) again


Error 5056 Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
Meaning:  The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM

Error 4001 Message: S_FT_DA_NO_RESPONSE or  Meaning: SP flash tool is having difficulty communicating with the device
Solution:
* Change the USB-port
* Run SP flash tool as Admin
* Ensure to install the correct drivers * Try another PC and USB cord
* Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing

Sp flash tool was successful but phone's calibration doesn't work Message: Soft keys and touch screen don't work / respond
Solution:
* Edit the scatter file using Notepad++ and remove NODL__  (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but aren't listed when you load the scatter file in SP flash tool. This way, these items will become listed when  next you load the scatter file (after saving of course) and therefore flashable



Error 4008 Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
Meaning: SP Flash tool encountered an error while attempting to flash files
Solution:
* Ensure the battery is in the phone and the phone is switched off before connecting for flashing
* Try using a higher version of SP flash tool
* Change the USB cord and port or PC
* Use the format option then download in SP flash tool

Error 3149 Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Meaning: SP Flash tool was unable to flash files to the phone
Solution:
* Ensure to run the latest version of SP flash tool as Administrator
* Format first then Download
* Don't tick a box with an unspecified / empty file path
* Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
* Try a different PC
* Try a different ROM
* Try a different USB cord
* Try formatting the phone first before flashing files to it

Error 3168  Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.
Solution:
* Ensure you're using the ROM for the exact phone model
* Try a higher version of SP flash tool
* Ensure to install the correct drivers for the phone on the PC

Error 2004 
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
Meaning: There was an interruption in the communication between SP flash tool and the device
Solution:
* Ensure the phone's Bootloader is unlocked
* Try a different USB cord
* Try a different port on the PC or another PC
* Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing

USB device not recognized Message: USB device not recognized prompt at system tray after connecting  the phone to PC
Meaning: The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems)
Solution:
* Try a different USB cord, PC port or PC

Error 1013  Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013)
Meaning: SP flash tool encountered an error while attempting to communicate with the phone via the target port
Solution:
* Try using a different port on the PC
* Install VCOM drivers using 
* Ensure the phone is switched off with battery inside before connecting to the PC for flashing
* Try using a different PC
* Try changing the USB cord
* Ensure the phone's USB port isn't damaged
Error 2020  Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
Meaning: SP flash tool encountered a problem moving the files to be flashed into the phone's internal SRAM
Solution:
* Use the latest version of SP flash tool
* In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
* Use the Format all + Download option
* Hold both volume buttons before connecting to the PC for flashing and release once flashing begins

Error 5007 
Message: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
Meaning: You're trying to flash an item with an unspecified path (no file selected for the ticked item/box)
Solution:
* Ensure the scatter file is in the same directory as the other file(s) to be flashed
* Untick any item whose file you do not have or whose path is not specified; yet, is ticked / selected for flashing

Error 4010 Message: BROM ERROR : S_FT_FORMAT_FAIL
Meaning: The blocks map in the scatter file doesn't match the phone's partition sizes
Solution:
* Try using the latest version of Sp flash tool
* Try using another firmware for the exact phone model

Error 3182 Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182)

Meaning: The ROM your're trying to flash is not compatible with the target device
Solution:
* Download the ROM for the exact phone model you're trying to flash
* Ensure to install VCOM drivers on the PC
* Don't tick any box (after loading the scatter file) without a file path / whose corresponding file has not been automatically or manually loaded.

Error 6012 Message: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00
Meaning: The Download-Agent being used is incompatible with the phone
Solution:
* Set Download-Agent to MTK_AllInOne_DA.bin

Error 1042
Message: BROM ERROR: S_TIMEOUT (1042)
Meaning: The flashing process took too long so SP flash tool encountered a timeout
Solution:
* Try flashing one file at a time
* Use the latest version of SP flash tool
* Try using a different PC and USB cord

Error 2 Message: BROM ERROR: ?? (2)
Meaning: SP Flash tool was unable to communicate with the phone
Solution:
* Try using a different PC (preferably Windows 7 or lower)
* Install the correct VCOM drivers for your PC's OS and architecture (32 or 64 bit)
* Try another USB cord


Error 2005 Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
Meaning: The device attempted to power on before SP flash tool could flash files to it
Solution:
* Hold the volume increase button while connecting to PC for flashing

Error 4058 Message: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
Meaning: SP flash tool was unable to locate the partition you're trying to flash to
Solution:
* Untick any item (box) with a blank or empty Location

Error EMMC
Meaning: EMMC may not be crashed because i am able to read back. 
(1002) S_INVALID_ARGUMENTS

Invalid scatter file.
(1003) S_COM_PORT_OPEN_FAIL
 

The problem with the port.
May occur for example if you are disabled in the BIOS com-ports (though in this case the com-port is a virtual and a physical USB, but when you turn off you just do not see the equipment that puts drivers on the preloader).
or a problem in the USB cable (cable helps change the firmware).
any problem in PC USB-port (port helps change).

(1011) S_NOT_ENOUCH_STORAGE_SPACE

Occurs when the size of any part of the firmware is larger than the allotted space (usually a block or core rekaveri). Decision.
We also learned that this error sometimes occurs on the "raw" versions flashtool, so you might help change the version flashers.
(1013) S_COM_PORT_OPEN_FAIL

Error in nature and orientation similar to error 1003. Solutions must be sought on the same principle (see. 1003).
Can also help to change the version flashers.
(1022) S_UNSUPPORTED_VER_OF_DA

You need to use a newer version of SP FlashTool.
(1040) S_UNSUPPORTED_OPERATION
 
Scatter file does not fit the phone. For example, in 6577 the title is present, and the phone is actually 6573
(2005) S_BROM_CMD_STARTCMD_FAIL

On phones with MTD flash if an error occurs:
When you select Download to block preloader or dsp_bl not set daw. You should use the appropriate version SPFT, such v2.xxx for phones MT6573, or off DA Download All.
When you select Download to block preloader or dsp_bl set daw. It is necessary to uncheck these blocks! If these blocks need to flash, it is necessary to connect the phone to BOOTROM.
When selecting ReadBack, Format, or MemoryTest. It is necessary to connect the phone to BOOTROM.

(2020) S_BROM_CHKSUM16_MEM_RESULT_DIFF
 
In the settings Flashtool forced to put a checkbox that the body without the battery and then connect through the test point with the battery.
(2035) S_BROM_CMD_JUMP_DA_FAIL

After you click download, try connecting to the computer off device with pre-tensioned volume buttons.
(3001) S_DA_EXT_RAM_ERROR

Possible connection problems. Check the cable and / or reconnect the cable to another port.
(3012) NAND_FLASH_NOT_FOUND
 
Problems associated with the definition of a flash memory device. Known methods to overcome this problem:
Try using a different version of flashers, because as the release of different versions and updated information about the flash memory.
Try to flash a smartphone on another computer, unnecessarily. are soft karaoke problems hampering correctly identify the memory on a particular machine.
(3013) S_DS_SOC_CHECK_FAIL

It is possible that in the SP_Flash_Tool not worth birdie on uboot. uboot - the operating system loader + drivers to initialize the basic equipment (screen, processor, GPIO).
Or when there is a line path Russian folder names such as: C: \ Users \ Kolyan \ Desktop \ Hata \ Firmware \ Firmware tablet \ 8.31 \ Surfer 8.31 3G_20130402_V1.03 \ Surfer 8.31 3G_20130402_V1.03
(3066) S_DA_HANDSET_FAT_INFO_NOT_FOUND


Occurs when an automatic formatting, you should try to set the addresses manually formatting.
(3144) S_DA_EMMC_FLASH_NOT_FOUND
 

Besides problems with iron can be Scatter when the file is not the phone. For example in the title is present emmc, and the phone is actually a MTD flash.
As well there is a chance that the problem will be solved if you use the machine with another operating system (in priority winXP) and completely install the drivers.
(3149) S_DA_SDMMC_WRITE_FAILED

mcking230 writes pierced version 3.1320.0.174, after the loss errors listened to the program and flashed version 5.1420.00 (At the time of writing, the latest version) choose Format all + download and it worked, the program was at the root of drive C.
(4001) S_FT_DA_NO_RESPONSE

Solution - Change USB-port and transfer the SP Flash Tool to the root of the C: drive
Also there is an option in the file download agent no information about the CPU / flash. Solution - upgrade flashers.
The problem could be hardware, such as the failed flash memory.
(4008) S_FT_DOWNLOAD_FAIL

Methods of practices that have solved this problem:
Change version flashers and most interesting is that in the older version.
Change the cable for firmware.
It is also possible in the process of flashing the village battery ... Solution: charge your phone and try the firmware again.


(4009) S_FT_READBACK_FAIL

In addition to reading errors in the phone the same error for errors in the file system PC. Eg not enough space for a file or file can not be overwritten because it is locked. To clarify the log should look.
(4032) S_FT_ENABLE_DRAM_FAIL

4032 an error occurred while trying to change the firmware on the device to the processor through the program MT6589 Sp_Flash_tool. The unit has recovered by formatting the phone via the button Format (do not do it if you have the machine on the CPU MT6575 or 6577) in the program sp_flash_tool, then download the official firmware and flashed it with all ticks through the button download. Sometimes you need to uninstall and reinstall the drivers and re-do the formatting, and then reflash if the previous attempt was unsuccessful.
Also check whether there is a way to scatter-file Russian characters, as well as in the directory where the folder with the program.
If all else fails, try to change the version of the flasher. It is recommended to start with a version 5.1352.01
(4050) S_FT_NEED_DOWNLOAD_ALL_FAIL


Occurs when block sizes are not the same in the PMT and scatter. In general, this error is treated to download all the blocks (one can usrdata enough), then the size in the PMT should switch to the right. Sometimes it helps to change the version flashers.
(5002) S_INVALID_DA_FILE

When configuring SP_Flash_Tool download agent should be selected is attached to this release flasher. The choice of other agents gives this error.
(5054) S_DL_GET_DRAM_SETTINGS_FAIL

Did a hard reset via fleshtul and now cant install the new firmware. Reset do Yeshe time too fails, crashes the same error. Problem was solved by resetting in the new drivers.

(5066) S_DL_PC_BL_INVALID_GFH_FILE_INFOR

Wrong files. For example when the scatter of the chosen folder is not yet prepared for the FT files. It is necessary to choose the scatter in the folder prepared for FT files.
(6124) S_SECURITY_INVALID_PROJECT (6124), MSP ERROE CODE: 0 x 00.


Get eliminated after flashing through native Preloader button download. After this, the modified firmware recovery took place without errors and then restore the firmware from a previously created backup.
(8038) SP FLASH TOOL ERROR) / (PMT changed for the ROM; it must be downloaded
 
Occurs if the names or addresses of the blocks in the scatter differ from the table inside the phone (PMT). Should be corrected scatter-file in the firmware, ie lead to the same kind with your current scatter file of the firmware that you are currently on the unit. An example of how to catch and edit manually given here.
If a scatter file with nothing had been done, but it's still displays this error, you can try to change the version of the flasher. It is recommended to start with a version SP Flash Tool v5.1352.01
Also there is a modified version of fleshtula that ignores this error and enables ask. But be careful! Not all devices Attached fayl SP Flash Tool v5.1352.01 read this thread why
Original theme using a modified version
Another way (not always work, because droidtuls not always creates a second scatter corrected sections):
Download the latest mtkdroidtools
Connect your phone and save the block map (stored 2 files and one of them will be named PMP)
Leave only PMP and rename it to normal view scatter
Through it you can flash any firmware without error 8038
(8045) SP FLASH TOOL ERROR
The nature of the error is similar to 8038, but in practice a scatter correction files do not help. To solve this problem, many went to the service center and they raised the unit via programmer.
At home, sometimes works firmware version through the DOWNLOAD button with all the other checkboxes (version fleshtula touch and try on several occasions).
(8200) SP FLASH TOOL ERROR

 Occurs if you try to flash the device on the same platform, firmware from another (eg you mt6577, and you try to flash the firmware of the device on mt6575, etc.)
Can also help to change the version flashers.

Credit To:https://forum.hovatek.com/

No comments: